In this article, we want to talk about the correct way to use the engine wash and introduce you to it.
How to use the engine washer and how should the car engine be washed
You may have this question, why and how should the car engine be washed, and which of these articles have stated this issue correctly? by whom are they expressed and finally consult with expert consultants outside whether this information is correct or not because today’s world is the world of information and we are faced with a lot of information in the virtual space and we have to distinguish between right and wrong. do
Well, let’s go to the principle of the practice, that is, the correct way to wash the engine
Engine washing fluid or degreaser is made up of many ingredients, each of which has its own function, and too little or too much of each causes malfunction and proper cleaning of engine grease. The reason for the high or low price of some Motorsports are their ingredients that we will talk about in detail in another article.
proper engine washing at home
If you don’t have time to go to the car wash and you have the necessary place to wash your car, you can wash your car engine by yourself.
We present the steps of washing it in the order of your service
1- First step: Cover all the sensitive parts of the engine, such as sockets, sensors, ECU, wires, etc., with plastic and glue, and remove the battery fasteners to prevent water from entering them.
2-Spraying the engine washing liquid on all the parts of the engine in a uniform way so that the car engine is cool and cool. In no case do not spray the engine washing liquid on a hot and running engine because it will vaporize and may cause a fire due to the heat of the engine.
3- Depending on the type of engine dirt, wait for 3 to 5 minutes, you will notice that the grease on the surface of the engine, gensets and other parts dissolves. Are the surfaces cleared or not?
If they are not easily removed, wait for the engine washing fluid to stay on the grease for a longer time so that it has a greater effect. After that, repeat the previous step again and clean the grease well from around the screws and all the places you have access to. After that, you can easily wash them and leave no trace of them
4- At this stage, if you have a home car wash at home, start washing your car’s engine from a distance of 30 to 40 cm and be careful of the sensitive areas, and if you don’t have a car wash, you can use a bottle of mineral water with a few nails on its lid. Make a hole and fill the bottle with water and spray it on the engine with pressure and wash your car engine. This method will take you more time, but you will be relieved that the computer and sensitive parts of your car engine will not be damaged.
5- After finishing the work, open the protectors and covers that you covered on the sockets and parts and do not start the engine for at least 3-4 hours and let the engine dry completely and then start the engine and if there is access to the wind You can dry the inside of wires and sockets with wind pressure.
conclusion
In this article, we wanted to tell you that washing the car engine is not that difficult, and the only difficulty is that you should pay attention to the electrical and sensitive parts of the engine so that water does not enter them. If this happens, you may incur heavy costs.